The latest iPhone versions rarely come with any glitches. Apple has made sure that they provide the best user experience to their customers.
However, nothing is perfect. Following the introduction of iOS 14 and 15, many users are reporting a common bug – the infamous liquid detected in lightning connector error that is disabling them from using their smartphones properly.
If you are facing the same issue, then stick with us till the end of the article because we are going to give out a list of effective solutions that you can use to fix the problem. So what can you do if some liquid has been detected in the lightning connector of your iPhone device?
What is the Liquid Detected in Lightning Connector Error?
If you are getting this error in your iPhone 12, iPhone 11, iPhone X, or SE 2, then it is an indication that there is some water or other liquid inside your charging port.
Usually, the error will pop up only when you are trying to charge your device and the phone detects that the charging port is not sufficiently dry. But since iPhone comes with an IP68 rating, shouldn’t it be able to withstand around 6 meters of water for half an hour? It sure can, but the software is going to warn you nonetheless, hampering your user experience.
The best way to resolve the issue would be to dry out your charging port. So how to get liquid out of the charging port?
The simplest way to dry out your iPhone is by tapping the mobile gently against the palm of your hand while the charging port is facing downwards. After tapping gently for some time, you need to leave the iPhone in the same position for half an hour to let the air do its thing.
If the issue still prevails, then you might be facing a different problem. In this article, we’ll discuss all the potential solutions that you can try to fix the issue.
Proven Solutions for Liquid Detected in Lightning Connector in iPhone Issue
If you already know how to dry a lightning connector, and if that hasn’t worked for you, then your issue might be lying elsewhere.
In this article, we’ll give you a list of easy steps that you can follow to eliminate the error.
Remove and Check your SIM Cards
The Liquid Detected in Lightning Connector error also predominates if there is some moisture in the SIM tray of your iPhone.
To fix the problem, here’s what you need to do –
- Switch off your iPhone device.
- Using a SIM ejector tool, remove the SIM tray from your phone.
- Observe if there are any scratches or hints of moisture or water on your SIM cards or SIM tray.
- Clean the SIM cards and the tray thoroughly.
- Push the SIM tray back inside your phone.
After the process, try charging your iPhone once again to see if the error is still there.
Restart your iPhone Device
If you notice that your iPhone device is completely dry, but the error is still there, it might be due to some minor software glitch. Rebooting your phone can do away with most of the software bugs, thereby fixing the problem in the process.
Here’s what you can do –
- Press the Volume Up button and release it rapidly.
- Press the Volume Down button and release it rapidly.
- After that, press and hold the Side Button of your iPhone device until the Apple logo flashes on your screen.
- Wait for the iPhone to reboot.
After the reboot is complete, check if the error is still there.
Use a Different Charging Cable
More often than not, the error pops up because of a fault in the charging cable. Even if you don’t detect any visible damages on your cable, use a different one to check if the issue is related to your iPhone or the charging cable.
Moreover, if you are using any local charger or charging cable instead of the original ones provided by Apple, we recommend that you switch back to Apple’s charger and cable as the issue might be related to that.
Reset all your iPhone Settings
Sometimes, the “Liquid Detected in Lightning Connector” error arises because of some faulty customized settings. The only way to solve the problem quickly, in this case, is to reset all your iPhone settings to their default values.
Here’s how –
- Open your iPhone’s Settings.
- Go to General settings.
- Locate and tap on Reset.
- Tao on Reset all Settings.
- Enter the admin login credentials.
- Tap on Confirm to give your final green light.
Now that the settings are back to their original values, check if the error prompt is still there.
Charge iPhone Early
Another way to avoid the error prompt is to avoid letting your iPhone’s battery level from dropping below a certain value. The trick is simple yet effective.
To avoid getting the liquid detection popup, always try and charge your iPhone before the battery levels drop below 40%.
Choose the “Emergency Override” Option
The liquid detection popup is accompanied by 2 different prompts that the user can opt for – the Dismiss option and the Emergency Override option.
The Dismiss option will prompt the iPhone device to force-shut the popup and skip the charging process. The Emergency Override option, on the other hand, will prompt the iPhone device to force the charging process.
Choose the “Emergency Override” option to see if the phone is being charged normally.
Factory Reset your iPhone
If your issue still prevails, then you unfortunately might need to reset your iPhone device to its factory settings. Doing this will eliminate a lot of major bugs and software glitches that might fix your issue during the process.
Note: It is important to know that the following steps are reversible and would cause you to lose all your data. Therefore, we strictly recommend that you create a backup of all your data and important information before going through it.
Here’s what you need to do:
- Go to your iPhone’s Settings.
- Go to General settings.
- Locate and tap on Reset.
- Locate and tap on Erase all Contents and Settings.
- Enter the admin login credentials or passcode if required.
- Tap on Confirm to give your confirmation.
Now the reset process will commence. Wait while the phone completes the process and then check if the error is fixed.
If none of our solutions worked, then chances are that you must be facing a deep technical issue. Unfortunately, you wouldn’t be able to fix the problem on your own in that situation. Your best option is to contact Apple support and get professional assistance. We hope that this article was helpful and that one of our 7 effective solutions worked for you.