How to Use Wrap Stabilizer in Adobe Premiere Pro?

How to Use Wrap Stabilizer

Many times, when we film without a gimbal or Steadicam, and the end results come out unsteady and shaky. Here comes the role of Wrap Stabilizer using Adobe Premiere.

It is one of the most popular platforms for editing in the world.

Though the platform is a bit confusion, as hundreds of tools are present in the platform.

But in this article, we will show you how to use wrap stabilizer to stabilize videos in Adobe Premiere Pro.

One of the most important things post recording a footage is to balance out your temperamental video.

That cannot be utilized in crude organization.

So, the Adobe Premiere Pro permits you to balance out those precarious recordings with a straight forward device that is shrouded directly in front of you.

It is known as ‘Wrap Stabilizer’ and it can in a split-second balance out the video recordings.

How to Use the Warp Stabilizer in Premiere Pro CC?

Follow the below steps to stabilize footage using the Warp Stabilizer –

1) First choose the clip or footage that you wish to stabilize.

2) Now navigate to Adobe Premiere Pro Effects panel and go Warp Stabilizer.

3) Now double click or drag Wrap Stabilizer onto the clip on the timeline.

4) Next you will see a blue Analysing message on your selected footage. (Leave it for a minute or two as the time taken depends on the complexity and the length of the clip you selected. Editing is possible in the background while Wrap Stabilizer does its job)

5) After its done, simply adjust the Smoothness parameter to tweak the overall amount of stabilization. (Remember to do this as per the results. 0 stands for the original and as the number go high so does more visible effect.)

6) Select Stabilization > Result > No Motion, if you wish to create a stationary camera effect with no movement.

7) Select Smooth Motion option if you wish to remove shakiness but keep the camera movement.

8) Now check the results of your editing at the Analyze option. Review your editing and make changes accordingly.

Dig further if you are not satisfied with the results and obviously to remove the shakiness of the footage.

Every time you make a change simply check it by clicking on the Analyse again option.

This will make sure that you are going in the right process and the initial effect has been applied successfully or not.

How Does Warp Stabilizer Effect Work?

After the above instructions you might have now understood how to use the Warp Stabilizer.

Yet to make the most out of it in Premiere Pro, it merits seeing how it works.

Essentially, Premiere dissects the recording frame by frame, moving the pixels inside each casing to cause the camera to show up consistent and steady.

This is overly helpful to streamline shaky shots, so by following the above steps you will be able to easily do it.

In case you are not happy with the default results of the Wrap Stabilizer, then simply tweak the sliders before taking the Advance options.

Pro Tips & Troubleshooting While Using Wrap Stabilizer

Premiere Pro’s stabilization capacity is an amazing asset, yet it has its impediments.

The relentlessness of a clasp may be counter balanced by some perceptible twisting out of sight.

You will know it when you see it. Change the Smoothness slider to lessen this impact until you are happy with the clip.

Also try changing the Method to Position, Rotation, Scale, or Subspace Warp.

If you are still not satisfied with tweaking the sliders, then hop on to Advance options.

Let us now discuss about the Advance options for Wrap Stabilizer.

Advance Options of Wrap Stabilizer


Wrap Stabilizer is somewhat of an exercise in careful control or balancing act.

There may be some trade-off between the perfection of a shot and losing a few pieces of the frame.

Remember the main goal here is to create a stable footage, so you might have to crop out the edges more than you would like.

This will insure a clean, smooth shot.

You can alleviate this by tweaking the Crop Less <-> Smooth More slider in the Advanced settings.

Shooting for Warp Stabilizer

If you already know that you are going to use a wrap stabilizer for your footage then keeping two things in mind can help in the process.

While shooting simply go for a wider frame, as this will help in stabilization later.

Also shooting with a faster shutter speed can also help you in the later stages of editing.

Both will be better options for the footage as well and will give you better flexibility while applying effects.

Arrangement of Effects

If you find something wrong while editing, this can be due to lost stabilization.

You can fix this by making sure that you do not change the source for Warp Stabilizer analysis.

Checking out the order or arrangement of Effects Controls panel.

Remember to apply effects on the top first.

This is because the Wrap Stabilization should always be on top.

On the off chance that you switch anything around, do not forget to analyse down the clip again.

Saving as a Preset

When you’ve discovered a blend of settings that gives you an outcome, you’re content with, you can spare it as a Preset.

This should accelerate your work process pleasantly when you are working with a great deal of insecure film or if you need to make a comparative impact over different tasks.

Recollect that Warp Stabilizer needs to examine the individual clip frame by frame, it is anything but a ‘one size fits all’ model.

So, recently hit that Analyse button considerably after you have applied the preset to turn it on.

These were some of the important points about Advance Settings.

After you become comfortable with the default Warp Stabilizer impact and what happens when you change the sliders, understand the settings in the Advanced tab.

Nitty-gritty Analysis is a basic checkbox that will make the calculation work more enthusiastically to discover portions of the recording to follow.

You may wind up with a smoother shot, however you will additionally have a lot heavier and better projects.

Because of Warp Stabilizer, utilizing Adobe Premiere to balance out video is brisk, and with a touch of training simple to get to grasp with.

So, much like most after creation fixes nothing beats getting things directly on the shoot.

Plan, shoot considering this element in the event that you expect to or get yourself a gimbal to streamline the shots in-camera.

If you are yet discontent or dissatisfied with your precarious film, Warp Stabilizer will do as well as can be expected to set it up.


This was all about how to stabilize videos in Adobe Premiere Pro using Wrap Stabilizer.

Don’t forget to get the grip on the Advance options mentioned in the article.

Those will help you to give better results when the default options of Wrap Stabilization don’t work for you.

So, what the wait?

Go now and get a destabilized clip and start using Adobe Premiere Pro’s stabilization.


Written by GeekyGuy

Geeky Guy is inspired by innovative technology taking shape around the world and this is what motivate him to start Geek After Hours, a tech blog featuring how to guides about computer, laptops, mobiles, software, and gadgets. He also like to write reviews about technology products with an aim to help you make better buying decisions.